Spokane Convention Center - Exhibit Hall Specifications

Questions?
The Sales department will guide you through booking and contracting your event.
Betsy Hammond, Booking Manager bhammond@spokanepfd.org 509.279.7007
Kelsey Soukup, Sales Manager ksoukup@spokanepfd.org 509.279.7007
Kay Riplinger, Sales Manager kriplinger@spokanepfd.org 509.279.7007
Stefanie Howe, Sales Manager showe@spokanepfd.org 509.279.7007

Exhibit Halls

Maximum Occupancies and Room Specifications
Exhibit Hall	Square Footage	Room Dimensions	Ceiling Height	Capacity Banquet	Capacity Theatre	Capacity Class	Reception	10x10 Booths
A	33,470	162 X 210	30'	2,150	2,781	1,900	3,200	175
B	21,790	120 X 180	30'	1,440	2,160	1,200	2,160	117
B1	10,529	80 X 116	30'	700	1,000	600	1,000	51
B2	11,240	80 X 116	30'	700	1,100	600	1,000	51
C	27,510	130 X 210	30'	1,800	2,750	1,600	2,750	130
D	17,390	110 X 132	22'	1,000	2,316	900	2,316	50
A - D	100,160	-	22'-30'	5,170	6,530	4,700	6,530	500

Lighting and Other Amenities
Exhibit Hall	Lighting & Amenities
Halls A, B and C	Luminaries are an industrial low bay type with reflectors. They are clustered with two 750W metal-halide and one 750w incandescent. The metal-halide lighting is individually controlled by the lighting control system. (This type of light is NOT instant on and requires about 5 minutes to“warm up”). The incandescent lights are dimmed in pairs of two. The lighting control system allows dim to “OFF” operation. Maximum illumination is approximately 10 to 15 foot candle.
Riverside Exhibit Hall D	Luminaries are an industrial low bay type with reflectors. The metal-halide is a 400W while the Incandescent are 250W. These mimic the lighting in Halls A, B and C and support a similar illumination.

Photos

334 West Spokane Falls Boulevard Spokane, Washington 99201 Phone: 509.279.7000 Fax: 509.279.7050